Cylinder Sleeve Compatible With 1988-2001 Johnson Evinrude V6 3.685 Big Bore Looper 200Hp 225Hp

OEM PART NUMBERS:
• LA119OB - L.A. Sleeve Cylinder Sleeve (OEM Sleeve Manufacturer)
• 1040SA - Advanced Sleeve / WSM Part Number
• 250-119 - WSM Catalog Number

SPECIFICATIONS:
• Bore Size: 3.685" (93.60mm)
• Sleeve Type: Straight with Ports, No Bridge
• Construction: Cast Iron
• Engine Configuration: 90 Degree V6 / V8 Loop Charged 2-Stroke
• Finish: Undersized, Requires Boring to Final Piston Size
• Finish Honing Required: Yes
• Decking May Be Required: Yes
• Interference Fit: .004-.005"
• Installation: Heat block to 400°F for 1 hour, or press-fit with frozen sleeve

FITS JOHNSON / EVINRUDE LOOPER OUTBOARD MOTORS:
• V6 90 Degree Big Bore Looper - 200HP (1988-2001), 225HP (1988-1992)
• V6 90 Degree Finger Port Looper - 225HP (1993-2001)
• V6 90 Degree Big Bore Looper - 250HP (1999-2001)
• V8 90 Degree Big Bore Looper - 250HP (1991-1998), 300HP (1988-1995)
• Ocean Pro, Ocean Runner Models

RELATED OEM PISTON PART NUMBERS (for reference):
• 436859 / 5006690 - Standard Port Piston (Finger Port 1993-up)
• 436860 / 5006691 - Standard Starboard Piston (Finger Port 1993-up)
• 5006671 / 432969 / 432072 - Standard Port Piston (Big Bore 1988-1992)
• 5006672 / 432970 / 432073 - Standard Starboard Piston (Big Bore 1988-1992)

RELATED OEM GASKET PART NUMBERS (for reference):
• 0437725 - Powerhead Gasket Kit (1993-up Looper)
• 0436891 - Powerhead Gasket Kit (1988-1992 Looper)
• 0436947 - Powerhead Gasket Kit (alternate)
PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.WARNING - This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
JOHNSON / EVINRUDE V6 OUTBOARD MOTORS:

V6 3.685 Big Bore Looper 200HP:
• Johnson/Evinrude V6 3.685 Big Bore Looper 200HP - 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
• Includes Ocean Pro, Ocean Runner, and Standard Models
• 90 Degree V6 Loop Charged 2-Stroke Carbureted

V6 3.685 Big Bore Looper 225HP:
• Johnson/Evinrude V6 3.685 Big Bore Looper 225HP - 1988, 1989, 1990, 1991, 1992
• 90 Degree V6 Loop Charged 2-Stroke Carbureted

V6 3.685 Finger Port Looper 225HP:
• Johnson/Evinrude V6 3.685 Finger Port Looper 225HP - 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
• Includes Ocean Pro and Standard Models
• 90 Degree V6 Loop Charged 2-Stroke Carbureted

V6 3.685 Big Bore Looper 250HP:
• Johnson/Evinrude V6 3.685 Big Bore Looper 250HP - 1999, 2000, 2001
• 90 Degree V6 Loop Charged 2-Stroke Carbureted

JOHNSON / EVINRUDE V8 OUTBOARD MOTORS:

V8 3.685 Big Bore Looper 250HP:
• Johnson/Evinrude V8 3.685 Big Bore Looper 250HP - 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
• 90 Degree V8 Loop Charged 2-Stroke Carbureted

V8 3.685 Big Bore Looper 300HP:
• Johnson/Evinrude V8 3.685 Big Bore Looper 300HP - 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
• Includes Ocean Pro and Standard Models
• 90 Degree V8 Loop Charged 2-Stroke Carbureted

NOTES:
• This sleeve fits the 3.685" big bore configuration only. Does NOT fit the earlier 3.500" small bore looper engines (1985-1987).
• Sleeve must be bored to correct bore size and finish honed after installation.
• Decking may be required after installation to match block surface.
• Verify your OEM part number before ordering.